Best News Network

Helping construction material manufacturers reduce the energy consumption, carbon footprint of heating and cooling homes

Helping construction material manufacturers reduce the energy consumption, carbon footprint of heating and cooling homes
Mirian Velay-Lizancos, a Purdue assistant professor of civil engineering, has developed a process that improves upon the traditional method to incorporate phase change materials into construction materials. Credit: (Purdue University / John Underwood)

Heating and cooling homes carries a hefty economic and environmental price tag. The U.S. Energy Information Administration has reported more than half of all home energy in the United States is used for heating and cooling, and it also represents more than 14% of the nation’s overall energy use. According to the World Green Building Council, the buildings and construction sector is responsible for 39% of global energy-related carbon emissions.

Mirian Velay-Lizancos, a Purdue University assistant professor of civil engineering from the Lyles School of Civil Engineering in the College of Engineering, is addressing these issues. She and researchers in her laboratory have developed a patent-pending, scalable, automatable process that improves upon the traditional method to incorporate phase change materials, or PCMs, into construction materials.

The incorporation of PCMs like paraffin, esters and salt hydrates into building envelope elements moderates the effect of outside temperature changes on the indoor environment. They convert changes in thermal energy into phase changes by transitioning from a solid into a liquid, or the opposite. They provide useful cooling or heat by absorbing or releasing energy during those transitions.

“Incorporating PCMs reduces energy consumption in buildings, which reduces carbon dioxide emissions and operational costs,” Velay-Lizancos said. “It also decreases water permeability of construction materials.”

PCMs are used in a building’s envelope, or the doors, exterior walls, foundations, roofs, windows and other components that create a barrier between the indoors and the outdoors. The thermal properties of building envelopes play a key role in a building’s energy consumption.

“Increasing the heat storage capabilities of building envelopes would reduce the effect of temperature fluctuations in a building,” Velay-Lizancos said. “This would increase the thermal comfort of the building and decrease energy consumption, carbon dioxide emissions and related economic costs of heating and cooling. It also would make buildings more resilient and energy independent and less susceptible to power outages and other energy supply issues.”

Velay-Lizancos said traditional methods to add PCMs in construction materials have drawbacks.

“Currently, PCMs are incorporated into other materials via microencapsulation or macroencapsulation,” Velay-Lizancos said. “However, these methods limit the use of PCMs. Microencapsulation has a negative effect on the strength and durability of construction materials. Macroencapsulation limits the shape and production method of construction materials.”

Velay-Lizancos’s method uses liquid immersion and a vacuum to incorporate PCMs after construction materials like bricks, drywall and concrete have already been formed.

Helping construction material manufacturers reduce the energy consumption, carbon footprint of heating and cooling homes
Darker areas show how far phase change materials, or PCMs, have penetrated the pores of construction materials that spent 15 minutes, 1 hour and 4 hours in a process developed by Mirian Velay-Lizancos, a Purdue assistant professor of civil engineering, and her research team. The process improves upon the traditional method to incorporate PCMs into construction materials, which could reduce a building’s energy consumption, leading to a reduction in carbon dioxide emissions and operational costs. Credit: Purdue University photo / Marina Garcia Lopez-Arias

“This increases the strength, enhances the durability and increases the thermal inertia of the construction materials,” Velay-Lizancos said. “This new method also distributes PCMs so they are concentrated in the surface layer of the construction materials. More of the PCMs are in contact with external surfaces of the building envelope, which makes the PCMs more effective.”

Velay-Lizancos’s method requires only a vacuum system, which she said is very accessible and easy for manufacturers to work with.

“Users will need to be familiarized with the process, but they will not need special training,” Velay-Lizancos said. “The process could be easily automatized and incorporated into the production chain of precast elements like bricks, concrete panels, drywall and pavers, among others.”

Velay-Lizancos and her research group tested the innovation at the Pankow Laboratory in the Lyles School of Civil Engineering. The initial tests were conducted with commercial bricks and 15 minutes of vacuum time.






A large experimental campaign was conducted on cement mortars with three water-to-cement ratios and, therefore, different initial porosity levels. PCMs were incorporated into the mortars for three different vacuum periods: 15 minutes, 1 hour and 4 hours. Velay-Lizancos and her team observed an increase on the thermal inertia of 24% and over a 22% of increase in the compressive strength, with just 7% of the volume of the element filled with PCM.

Velay-Lizancos said the uneven distribution of the PCM concentrated in the surface layer makes the PCM more effective in enhancing thermal properties.

“The method used in this study introduces the PCM into the layer of the material that is closer to the material’s surface, meaning that more will be in contact with the external surfaces of the building envelope, resulting in more effective usage of the PCM,” Velay-Lizancos said.

“Furthermore, this method pushes the PCM material into the capillary pores through the vacuum. Due to the capillary forces, leakage of PCM was not observed, even when the final composite was exposed to high temperatures well above the melting point of the PCM used.”

A paper describing the research methods and results has been published in the March 2023 issue of the journal Construction and Building Materials.

The next milestone to develop the PCM incorporation method is to build a full-scale prototype.

“This will allow us to visualize with cameras and sensors the thermal performance of the building envelope,” Velay-Lizancos said. “Clients will have the hard data and also be able to visualize the advantages of this technology.”

More information:
Marina Lopez-Arias et al, High thermal inertia mortars: New method to incorporate phase change materials (PCMs) while enhancing strength and thermal design models, Construction and Building Materials (2023). DOI: 10.1016/j.conbuildmat.2023.130621

Provided by
Purdue University


Citation:
Helping construction material manufacturers reduce the energy consumption, carbon footprint of heating and cooling homes (2023, March 1)
retrieved 1 March 2023
from https://techxplore.com/news/2023-03-material-energy-consumption-carbon-footprint.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.

Stay connected with us on social media platform for instant update click here to join our  Twitter, & Facebook

We are now on Telegram. Click here to join our channel (@TechiUpdate) and stay updated with the latest Technology headlines.

For all the latest Technology News Click Here 

 For the latest news and updates, follow us on Google News

Read original article here

Denial of responsibility! NewsAzi is an automatic aggregator around the global media. All the content are available free on Internet. We have just arranged it in one platform for educational purpose only. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials on our website, please contact us by email – [email protected]. The content will be deleted within 24 hours.