Site icon News Azi

Assessing the environmental impact of nuclear power generation

Assessing the Environmental Impact of Nuclear Power Generation. Credit: Ritsumeikan University

In a constantly evolving world, rapidly growing populations coupled with urbanization and industrialization are leading to an ever-increasing demand for energy. The challenge today lies in meeting these energy requirements while keeping global warming in check—a condition which fossil fuels do not fulfill. In an effort to mitigate the environmental degradation and natural resource depletion linked to the usage of fossil fuels, nuclear power is being promoted as an alternative source of energy.

Conducting a life cycle assessment (LCA) of any energy source is important to understand how it affects the environment. A lot of studies have, therefore, assessed the life cycle cumulative energy consumption and greenhouse gas (GHG) emissions related to electricity generated via nuclear power. However, most of these studies looked at the GHG emissions and the amount of energy consumed, which might lead to a less comprehensive assessment of the environmental impact and sustainability of electricity generated via nuclear power. For example, we are yet to understand the total resources used during this process.

In an attempt to provide a more holistic perspective, a group of scientists from Ritsumeikan University, Japan analyzed the environmental impact of nuclear power generation through a less-considered measure—the volume of resources extracted from the lithosphere during the life cycle of this process. Their study focused on the mining methods, the nuclear reactor types, and the type of uranium fuel cycle system used during nuclear power generation, and how these alter the process’ environmental impact. They also assessed the different grades of uranium ore mined—a highly variable entity—and its effect on the total material requirement (TMR). This paper was made available online on 8 June 2022 and will be published in Volume 363 of the Journal of Cleaner Production on 20 August 2022.

“An LCA of the resource use for 1 kWh nuclear power generation based on uranium was performed by analyzing TMR,” says Associate Professor Shoki Kosai, the corresponding author of the study. “We looked at both open and closed fuel cycles, and three types of uranium mining methods: open-pit mining, underground mining, and in situ leaching (ISL), apart from other variables in nuclear power generation, for a thorough LCA.” GHG emissions and natural resource usage were subsequently evaluated for these variables.

The researchers found that the TMR coefficient (indicating the mining intensity) of enriched uranium fuel was the highest, followed by nuclear fuel, reprocessed uranium fuel, mixed oxide (MOX) fuel, and lastly, yellow-cake. The grade of uranium ore had a huge impact on the TMR coefficient as well, which meant that TMR varied significantly with different mining methods. In situ leaching had the lowest TMR. However, the mining method had a more significant impact on resource utilization as compared to its impact on GHG emissions.

Discussing the impact of fuel cycles, Professor Eiji Yamasue says, “We found that a closed cycle that reprocesses uranium fuel uses 26% lower resources than an open cycle that does not reuse its by-products.”

Additionally, it was found that the natural resource use of nuclear power generation was similar to that of renewable energy and significantly lower than that of thermal power generation. Furthermore, the global warming potential and TMR of nuclear power generation showed very different trends. Along with lower GHG emissions, nuclear power generation also used fewer natural resources, making it an environmentally favorable source of power generation.

“Maintaining a circular economy, even for resource use, is important. Our findings can assist policy makers in formulating long-term energy policies which consider electricity and power generation using nuclear power,” concludes Dr. Kosai.


US officials eye fuel supply for advanced nuclear reactors


More information:
Nanami Nakagawa et al, Life cycle resource use of nuclear power generation considering total material requirement, Journal of Cleaner Production (2022). DOI: 10.1016/j.jclepro.2022.132530

Provided by
Ritsumeikan University

Citation:
Assessing the environmental impact of nuclear power generation (2022, June 20)
retrieved 20 June 2022
from https://techxplore.com/news/2022-06-environmental-impact-nuclear-power.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.

Stay connected with us on social media platform for instant update click here to join our  Twitter, & Facebook

We are now on Telegram. Click here to join our channel (@TechiUpdate) and stay updated with the latest Technology headlines.

For all the latest Technology News Click Here 

 For the latest news and updates, follow us on Google News

Read original article here

Denial of responsibility! NewsAzi is an automatic aggregator around the global media. All the content are available free on Internet. We have just arranged it in one platform for educational purpose only. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials on our website, please contact us by email – admin@newsazi.com. The content will be deleted within 24 hours.
Exit mobile version